In the world of fiber optics, what we commonly call "light injectors" for inspection are mainly divided into two critical categories based on their function: those used to identify visual faults and those used to measure power losses.
1. Visual Fault Locator (VFL)
This is the most basic and essential "injector." It uses a visible spectrum laser (generally 635-650 nm red light).
Function: It injects a powerful light that "escapes" from the fiber where there is a break, a macrobend (excessive bend), or a faulty splice. The technician will see a bright red dot through the cable jacket.
Types: * Pencil Type: Portable, for short distances (5-10 km).
Benchtop Type: For laboratory or high-power testing.
Integrated: Many modern OTDRs already include a VFL port.
2. Optical Light Sources (OLS)
Unlike VFLs, these inject infrared light (invisible to the human eye) at specific wavelengths (850/1300 nm for multimode or 1310/1550 nm for single-mode).
Function: They are used in conjunction with a power meter to calculate the total attenuation of a link (Level 1 Certification).
Types:
LED: For multimode fibers.
Laser: For single-mode fibers.
Triple/Quad Wave: Devices that inject multiple frequencies through the same port to expedite the process.
3. Live Fiber Identifiers (LFI)
This is an "indirect" injector. It does not connect to the connector end, but rather "bites" or clamps onto the cable.
Function: Creates a controlled macrobend to detect data traffic (light) passing through the fiber without disconnecting it. Some models can also inject a tone signal (270 Hz, 1 kHz, 2 kHz) so another technician can locate it at the other end.
4. Light Sources for Face Inspection (Probes)
Although they don't inject light through the transmission core, digital inspection probes project light onto the front face of the connector (ferrule).
Function: Illuminate the surface so a microscopic camera can detect dirt, oils, or scratches that block light.
A vital safety tip: Never look directly at the end of a fiber if you suspect an injector is on, especially if it's a light source (invisible), as it can permanently damage your retina without you feeling any pain.