Patch-Cord U/FTP C5e 26/7 PVC Negro Redondo Boot Corto Interior F/aa. PatchSee

Patch-Cord U/FTP C5e 26/7 PVC Black Round Boot Short Inside PatchSee

PATCHSEE RJ 45 patch cables are individually designed and tested to connect network equipment to the network user's patch panel and outlet. They are warranted to the TIA/EIA-568-B-2.1 June 2002 cat 5e channel test on a certified permanent link for transmission frequencies up to 100 MHz.
Available in the following lengths 0.60 M. - 1.20 M. - 1.50 M. - 2.10 M. - 3.10 M. - 4.90 M.

PatchSee solution and main features
➣ Light identification through plastic fiber optics,
➣ 6 lengths available from 0.6 m to 4.9 m
➣ Wire color: black with white marking
➣ Boot color: black with white marking
➣ Connector compatible with PATCHCLIP color clips
➣ Packaging: bags of 12 pieces
➣ Boot marking: length and P/N
➣ Marking of unique serial numbers on the cable
➣ Sample electrical performance tests (1000 Base T warranty, return loss, attenuation, NEXT, etc.)

Technical specifications:
➣ Number of pairs 4
➣ Conductor Stranded bare copper wire
➣ Gauge 26 AWG
➣ Insulation Foam Skin Polyethylene
➣ Pair of Al laminated metal sheets
➣ Optical waveguide 2 POF 0.5 mm
➣ Drain Tinned stranded drain wire
➣ PVC jacket - Black with white print
➣ Overall diameter 5.8 mm
➣ UL 1863 Polycarbonate Plug Housing
➣ Contacts Contacts moved
➣ Contact Gold plating 50 µ-inch gold minimum (1.2 µm)
➣ Tinned shield
➣ Power Over Ethernet (POE) Compatible with POE, POE+ and 4PPOE (See TSB-184-A and TIA/EIA-568.2-D recommendations)

Mechanical properties
➣ Fire Spread Test: UL 4441 VW 1 Flame Test
➣ Temperature range (During operation): -20°C to +75°C
➣ Fire load: 372 MJ/km
➣ Radius of curvature: >25 mm without load

Electrical properties (at 20°C +/- 5°C)
➣ DC loop resistance: < 340 Ω/km
➣ Insulation resistance (500V): > 2000 MΩ*km
➣ Capacitance at 800 Hz: Nom. 43nF/km
➣ Impedance 1-100 MHz: 100 +/- 15 Ω
➣ Impedance 100-250 MHz: NO
➣ Propagation delay: < 427 ns/100m
➣ Test voltage (DC, 1 min): 1000 V

PATCHSEE