Patch-Cord U/FTP C6 26/7 LSHF Negro Redondo Boot Largo Interior. PatchSee.

Patch-Cord U/FTP C6 26/7 LSHF Black Round Boot Long Inside PatchSee

PatchSee RJ 45 patch cables are individually designed and tested for connection of network equipment to patch panel and network user exits. They are warranted for the TIA/EIA-568-B-2.1 June 2002 cat 6 channel test on a certified permanent link for transmission frequencies up to 250 MHz.
PatchSee solution and main features
➣ Light identification by plastic fiber optics
➣ 6 different lengths from 2 ft (0.6 m) to 16 ft (4.9 m)
➣ Sheath color: black with white marking
➣ Cap colour: Gray with white marking
➣ Compatible with removable PATCHCLIP clip, 16 colors available
➣ Packaging: boxes of 6 or 12 pieces, depending on the length
➣ Cap marking: length and P/N
➣ Unique serial number marking on the cable
➣ Guaranteed 5 years

Technical Specifications
➣ Number of pairs: 4
➣ Type: U/FTP
➣ Conductor: Stranded bare copper wire
➣ Gauge: 26 AWG
➣ Insulation: Polyethylene Skin Foam
➣ Single pair screen: Al laminated metal pair sheet
➣ General screen: none
➣ Optical waveguide: 2 POF 0.5 mm
➣ Drain: Tinned braided drain wire
➣ Jacket: LSOH Black with white print
➣ Overall diameter: 6.2 mm
➣ Outlet box: UL 1863 Polycarbonate 2-level with handle bar
➣ Contacts: moved contacts
➣ Contact coating: 50 µ inches (1.2 µm)
➣ Shielding: Tinned
➣ Power Over Ethernet (POE): Compatible POE, POE+, et 4PPOE (See TSB-184-A and TIA/EIA-568.2-D recommendations)

Mechanical properties
➣ Fire Spread Test: UL 1581 VW 1 Flame Test
➣ Temperature range (During operation): -20°C to +75°C
➣ Fire load: 372 MJ/km
➣ Radius of curvature: >25 mm without load

Electrical properties (at 20°C +/- 5°C)
➣ DC loop resistance: < 340 Ω/km
➣ Insulation resistance (500V): > 2000 MΩ*km
➣ Capacitance at 800 Hz: Nom. 43nF/km
➣ Impedance 1-100 MHz: 100 +/- 15 Ω
➣ Impedance 100-250 MHz: 100 +/- 22 Ω
➣ Propagation delay: < 427 ns/100m
➣ Test voltage (DC, 1 min): 1000 V

PATCHSEE