Jumper F.O. 9/125 OS2 3.00mm 2xLC(UPC) to 2xLC(UPC) 25.00 Meters Yellow Parallel NOREVERSE Asomep
OS2 single-mode fiber optic patch cords are used to connect networks over longer distances, between buildings and campuses, and in long-haul environments.
metropolitan and access telecommunications and CATV networks. All assemblies are fully tested before delivery and are delivered with the test result. Most
Common connector types, configurations and lengths are available from stock, using either 3mm (for robustness) or 2mm diameter cable.
on request. OS2 singlemode patch cords are supplied with a yellow LSZH cable jacket as standard. Unstored settings (length, color,
connectors and cable type) can be manufactured to meet specific requirements.
LC Enhanced Patch Cords supplied with a short boot are ideal for high density applications with reduced space requirements. The length from the tip of the connector to start the assembly is 40mm, compared to 66mm for standard LC - 40% shorter! These patch cords have the added benefit of being supplied with reduced bend sensitivity of ITU-T G.657 single-mode optical fiber which exhibit much lower optical power loss under crimped conditions while still being compatible with patch cords. Conventional cabling.LC short boot are designed to meet IEC, EN or Telcordia GR 326 requirements.
CHARACTERISTICS
• SC, LC, ST, FC, MU and E2000 as standard. Other connectors available
• LSZH - Low Smoke, Zero Halogen, Yellow Jacket
• Simplex and Duplex assemblies
• 900 µm tight buffer, 3 mm simplex and duplex cable (2 mm cable on request)
• Available in other colors
• Duplex flat, duplex round and shielded patch cords also available
• Short boot and Uniboot cables also available
• All patch cords come with UPC or APC polished connector end as standard
• OS2 fiber meets or exceeds all relevant ISO/IEC, TIA/EIA and ITU standards
APPLICATIONS
Data centers. LAN/Enterprise. Metropolitan and access networks. FTTH. CCTV. Transmission, switching and test equipment
BLUE PC connector
Asomep Fiber System