Inyector PoE ( PoE Injector ) 10/100/1000Mbps 2 x Port Gigabit 2 x 30W HIGH PoE IEEE 802.3at ( I-SWHUB-3000STY ) Techly

PoE Injector (PoE Injector) 10/100/1000Mbps 2 x Gigabit Ports 2 x 30W HIGH PoE IEEE 802.3at (I-SWHUB-3000STY) Techly

Save time and money by transmitting data and power over existing network cabling.
Compatible with IEEE 802.3at (PoE+).
Up to 30 watts of PoE output power.
Supported distance: up to 100 m.
Compatible with all IEEE 802.3at and IEEE 802.3af compliant PoE devices (access points and wireless bridges, VoIP and IP surveillance cameras, etc.).
Supports IEEE 802.3at/af detection, as well as short-circuit, overload, and overvoltage protection.
Internal power supply.
Fanless design for quiet operation.
CE certified.

Standards:
IEEE 802.3af (Power over Ethernet),
IEEE 802.3at (High-Power PoE+ Power over Ethernet),
IEEE 802.3 (10Base-T Ethernet),
IEEE 802.3ab (Gigabit Ethernet),
IEEE 802.3u (100Base-TX Fast Ethernet),
IEEE 802.3x (Flow Control, for full-duplex mode).

General Information

Compatible with:
- Cables: 100Base-TX Cat5 UTP/STP 8-pin RJ45
- 1000Base-T Cat5e UTP/STP 8-pin RJ45

Ports:
- One 10/100/1000 Mbps RJ45 input port
- One 10/100/1000 Mbps RJ45 output port for data and power.

Protection Features:
- Short-circuit to ground (GND) protection
- Overload protection (current greater than 0.6 A)

PoE Configuration: IEEE 802.3af/at Mode A standard

- Pin 1: DC (+)
- Pin 2: DC (+)
- Pin 3: DC (-)
- Pin 6: DC (-)

Certifications: FCC Class A, CE, UL

LED: Bi-color LED for power and PoE

Power Supply: 100~240 V AC, 50~60 Hz
Power Consumption: 35 W (maximum)

Physical Information: Plastic housing

Dimensions: 130 mm (Depth) x 57 mm (Width) Dimensions: 34 mm (height)
Operating temperature: 0–50 °C
Operating humidity: 5–90% RH, non-condensing
Storage temperature: -20–80 °C

Package contents:
High-performance Gigabit PoE+ injector,
power cable,
user manual