Applications Check performance of cables and networks according to Gigabit Ethernet standards.
Main features: Network traffic performance test on copper and fiber in the IEEE802.3ab standard. Wiremap test for opens, shorts, wrong wires, and split pairs in the TIA-568 standard. Gigabit link verification for copper and fiber cabling. PoE/PoE+ verification showing the voltage at the device location. Check the network settings (device IP/gateway address/subnet mask). Switch port identification via LLDP/CDP protocols. Distance to fault using TDR technology (copper only). Ability to identify and locate wires with an amplifying probe (62-164). Optical Power Indication (with com[...]
If you install, maintain, or repair data cabling or Ethernet networks, the Signaltek NT Cable and Network Qualifier lets you test network performance up to one Gigabit per second of traffic (1 Gbps). By simulating different types of traffic flow, users are able to verify and document the performance of cables and networks according to Gigabit Ethernet standards. When you don't require network certification, the Signaltek NT Cable and Network Qualifier is an economical solution for error-free performance testing of copper and fiber networks. Transmission tests are the faithful way to check the performance of your networks There is no industry standard that defines the measurement requirements of cable qualifiers, consequently any cable qualification is not sufficient proof that the cabling is suitable for transmitting data. The Signaltek NT uses a qualification method known in the Telecommunications industry as Test Transmission. This tests the performance of a network by sending Ethernet traffic to a remote unit (at the other end of the cable or network) and back to the main unit, and checks the data packet loss rate according to the Gigabit standard. Ethernet IEEE802.3ab. This provides a clear Pass/Fail of the link under test.
Signaltek NT does not require connectivity configuration between the main unit and the remote unit, they are detected automatically. You simply have to select the type and volume of traffic to send (VoIP, CCTV, Video, Web).
Applications Check performance of cables and networks according to Gigabit Ethernet standards.
Main features: Network traffic performance test on copper and fiber in the IEEE802.3ab standard. Wiremap test for opens, shorts, wrong wires, and split pairs in the TIA-568 standard. Gigabit link verification for copper and fiber cabling. PoE/PoE+ verification showing the voltage at the device location. Check the network settings (device IP/gateway address/subnet mask). Switch port identification via LLDP/CDP protocols. Distance to fault using TDR technology (copper only). Ability to identify and locate wires with an amplifying probe (62-164). Optical Power Indication (with compatible SFP modules). Network stress tests before installing bandwidth demanding devices. Flashing of the port to visualize the trace of the cable from the outlet of the area and the switch of the network. Displays the port ID on switches with LLDP/CDP enabled to remove cable trace manually.
Packaging: 1xdisplay. 1x remote. 2 x NiMH batteries. 2 x patch cords – 30cm. Cat 5eSTP. 2 x chargers with EU/UK/US adapters. 1 x USB to Wi-Fi adapter. 1 x User Manual. 1 x carrying case.
NETWORK CABLETESTER FIREWIRE To test CAT5/6 network and ISDN connections It has RJ11, RJ45, USB (type A), Mini USB (type B), and a 6-pin IEEE1394 Firewire port. Verifies or checks for short circuits on faulty cable conductors. Check connection system with integrated LED display has 8 individual systems Power is by a 9V battery. 8NOT INCLUDED IN THE PRODUCT) Protection bag included Tests RJ11, RJ12, RJ45 USB, BNC, IEEE1394
Features: Test 4 types of cables: RJ11, RJ45, USB and BNC Simple one button test Test patch cords and cabling already installed Maximum test distance 183 m LEDs indicate continuity and faults Test shielded and unshielded cables
NETWORK CABLETESTER FIREWIRE To test CAT5/6 network and ISDN connections It has RJ11, RJ45, USB (type A), Mini USB (type B), and a 6-pin IEEE1394 Firewire port. Verifies or checks for short circuits on faulty cable conductors. Check connection system with integrated LED display has 8 individual systems Power is by a 9V battery. 8NOT INCLUDED IN THE PRODUCT) Protection bag included Tests RJ11, RJ12, RJ45 USB, BNC, IEEE1394
Features: Test 4 types of cables: RJ11, RJ45, USB and BNC Simple one button test Test patch cords and cabling already installed Maximum test distance 183 m LEDs indicate continuity and faults Test shielded and unshielded cables
Versiv™'s modular design allows for copper certification, fiber optic loss detection, OTDR testing, and inspection of fiber endfaces Unmatched speed for Cat 6A, 8, Class FA and I/II, and all applicable standards The ProjX™ system manages the requirements and progress of work from configuration to system acceptance, ensuring that all checks are completed correctly. The Taptive™ user interface simplifies setup and eliminates errors. Analyze test results and create professional test reports with LinkWare™ management software. Graphically displays the source of failures, including crosstalk, return loss, and shield failures for faster troubleshooting. Certified by Intertek to TIA Level 2G – the mos[...]
The LanTEK IV-L, a high-performance copper cable certifier manufactured by TREND Networks.
If you work in telecommunications or network maintenance, this device is a technical powerhouse. Here are the most interesting features that make it stand out:
1. The VisiLINQ™ Adapters (Its Greatest Innovation) The most striking feature at first glance isn't the device itself, b[...]
The WireXpert sets new standards for more efficient, more precise standards compliant certification of structured cabling systems. Whether testing copper of fiber optic cabling, the new Wire- Xpert masters all current and proposed standards, including ISO/IEC 11801, Cenelec EN50173 and TIA 568. Fast and simple operation with the state-ofthe- art touch-control display quarantees accurate results and easy of use. With a frequency range 1 to 1600 MHz, the Wire- Xpert has been developed to test all current and proposed future cabling standards. The instrument automatically performs a the specified tests in the selected autotest suite in less than nine seconds (for Class E(A)). When faults occure the high-precision[...]
NetXpert 1400 LAN Qualifier (PS_NX1400) (Discontinued) replaced by NetXpert XG2
The NetXpert 1400 is an essential tool for network installers and system administrators who need to bridge the gap between a simple continuity tester and an expensive lab certifier.
The NetXpert 1400 provides a complete solution for cable qualification and troubleshooting of live networks, enabling quick and easy verification and documentation of cabling links' ability to support Gigabit Ethernet operation compliant with the IEEE 802.3ab standard.
Regardless of the category of cables and connectors installed, a "Pass/Fail" result indicates whether the existing cabling can support data rates up to 1 Gbit/s.
Link testing up to 1 Gbps to identify link capacity and [...]
USEFUL NETWORK QUALIFIER, WIRED FOR OPTIONAL COPPER IN OPTICAL FIBER
LAN qualifier with network diagnostics up to 1 Gbps
The new standards of up to 10 Gbit / s configure the environment of next-generation qualifiers. Especially in the area of WLAN access points, increasingly high data rates also play an important role on the access side. To find out if existing wiring supports the highest data rates, operators must perform tests before commissioning to avoid unpleasant surprises. NetXpert XG already offers the answer to these new challenges!
NetXpert XG generates detailed or summarized results reports in PDF or CSV format with your company logo. Reports can be exported from your device through a USB memory. It is possible to licens[...]
Specialized Technical Training Program Equipment: LanTEK IV-L Network Certifier (R163030)
Format: Live Videoconference (Platform to be agreed upon)
Estimated Duration: 2 hours
Course Objective To train technical personnel in the expert operation of the certifier to maximize field productivity, ensure the accuracy of measurements according to international standards, and optimize report management.
Training Content Module 1: Configuration and Setup (30 min) Interface and Ergonomics: Menu navigation and equipment customization.
Project Configuration: Creating clients, sites, and cable naming structures.
Standard Selection: Configuring limits according to ISO/TIA (Cat 5e/6/6A).
Net Prowler™ cabling and network tester is a valuable piece of test equipment for computer network technicians and IT workers. This multi-function tester makes time consuming tasks like setting up and troubleshooting networks faster and easier than ever before. The Net Prowler offers a full set of features including network mapping, link test, IPv4 & IPv6 ping testing, DHCP testing, DNS discovery, and URL Ping tests. LLDP identifies crucial Ethernet switch information, while IP Mapping discovers and displays network IP devices. The Net Prowler includes TDR technology for verifying and tracking cable integrity for opens, shorts, miswires, split pairs and reversed pinout as well as measuring cable length of network cables, telephone and coaxial cables. To keep track of test results for[...]
LanTEK IV-S 3000Mhz Certifier Tool with Cat.6A permanent link heads. Includes 2 Cat.8 Channel adapters
THE MOST POWERFUL AND FASTEST COPPER AND FIBER CABLE CERTIFIER WE HAVE EVER MADE The LanTEK IV-S copper and fiber data cable certifier is the future of cable certification and testing. Saving time by testing and saving a Cat 6A link in 7 seconds and certifying cables up to Cat 8.1 and Cat 8.2, including TCL and Unbalance Resistance measurements.
Versiv™'s modular design allows for copper certification, fiber optic loss detection, OTDR testing, and inspection of fiber endfaces Unmatched speed for Cat 6A, 8, Class FA and I/II, and all applicable standards The ProjX™ system manages the requirements and progress of work from configuration to system acceptance, ensuring that all checks are completed correctly. The Taptive™ user interface simplifies setup and eliminates errors. Analyze test results and create professional test reports with LinkWare™ management software. Graphically displays the source of failures, including crosstalk, return loss, and shield failures for faster troubleshooting. Certified by Intertek to TIA Level 2G – the mos[...]
This tone generator and probe kit is the first solution to combine digital and analog signaling in a single tool, providing the most advanced cable tracing technology for any network environment, even live networks.
Key Features Dual Technology (Digital and Analog):
Digital Mode (IntelliTone™): Ideal for safely and efficiently tracing and locating data cabling in live (switched) networks. Rejects noise and spurious signals for accurate, confusion-free tracing.
Analog Mode (SmartTone™): Used to isolate individual wire pairs and trace voice/audio and video cabling.
Advanced Tracing: Enables quick identification and isolation of difficult-to-find, hidden, or b[...]