Hot Deals

Home

Active filters

  • Categories: Cobre
  • Categories: Herramientas Consumibles

Conector Macho RJ45 FTP 8P8C Cat.6a (8Vías) AWG23/1 (FRONTAL) TOOL NECESARIA ( Cables1,2mm/1,4mm 3P 50U") FE-HQ6A2-50PG Keynet (

Ref. CMFFEHQ6A250PG

En stock
Price €0.98
RJ45 Male Connector FTP C6A 23AWG Rigid Front View for 1.2mm/1.4mm cables 3P 50U" Tool Needed

- Connector with contact for installations of the highest quality level.
- Certification ``link channel / permanent´´
- Cat6A connector with wire guide for 500 reconnections.
- They can be mounted on both single-wire and multi-wire (flexible) cables.
- Quick and easy to install connector.

Conector Macho RJ45 FTP Cat.6 AWG22/1 (Lateral) Tool Free Min.1u. CON GUÍA Asomep

Ref. CMFSTPC62227

Sin stock
Price €11.96
Male Connector RJ45 FTP 8P8C Category 6 (8 Ways) AWG22/1 Rigid (Side View) No Tool Required Minimum 1u. WITH Asomep GUIDE

MALE RJ45 STP CONNECTOR FOR SHIELDED RIGID/FLEXIBLE WIRE
SPECIAL FOR LARGE DIAMETERS FROM AWG22/1 TO AWG27/7
SPECIAL POE POWER OVER ETHERNET (ASOMEP)

Zinc die cast body with separate dust cover and strain relief charger.
Class E performance according to ISO/IEC11801 and IEC60603-7-5.
Compact cable manager for AWG 22/1 .. AWG 26/1 or AWG22 / 7 ...
Pair management according to color codes TIA 568A / B and industrial Profinet 1-2-3-6.
Re-termination capacity up to 10 times, for AWG27/7 up to 5 times.
Suitable for cable diaphragm from 6.0mm .. 9.0mm
Strain relief with cable ties
WE TAKE CARE OF THE CON[...]

Util Tester SIGNALTEK NT con pantalla táctil

Ref. PMR156005

Sin stock
Price Consultar Precio
Util Tester SIGNALTEK NT with Touch Screen

Applications
Check performance of cables and networks according to Gigabit Ethernet standards.

Main features:
Network traffic performance test on copper and fiber in the IEEE802.3ab standard.
Wiremap test for opens, shorts, wrong wires, and split pairs in the TIA-568 standard.
Gigabit link verification for copper and fiber cabling.
PoE/PoE+ verification showing the voltage at the device location.
Check the network settings (device IP/gateway address/subnet mask).
Switch port identification via LLDP/CDP protocols.
Distance to fault using TDR technology (copper only).
Ability to identify and locate wires with an amplifying probe (62-164).
Optical Power Indication (with com[...]

Util Kit Fusionadora FITEL FURUKAWA NINJA. Incluye: Holders fijos S712T-010 , cortadora S327, F.A.Cable red, 1 batería, , afilad

Ref. ATSNINJANJ001

Sin stock
Price Consultar Precio
FITEL FURUKAWA NINJA NJ001 Fuser KIT


It includes:
Configuration of S712T-010 fixed Holders for 250um and 900um fibers, S326A precision cutter, triple hole fiber stripper, power supply and mains cable, 1 battery, spare electrode pair, electrode sharpener, cleaning brush, carrying case , user manual

The FITELNINJA NJ001 Handheld Single Fiber Fusion Splicer is suitable for all METRO, LAN and FTTx fibers including ultra flex insensitive fibers. With its low profile, compact and rugged body, the NJ001 offers reliable splices in harsh environmental conditions. The large battery capacity allows 100 splicing and heating cycles. Combining portability, power, flexibility and field ruggedness, the NJ001 offers fast and consistent splicing with outstanding mobili[...]

Conector Macho RJ45 UTP 8P8C Cat.6e (8 Vías) AWG 23/? 10/100/1000 30u" Tool Free Blanco Asomep

Ref. CMUC5C6TOOLFREEUTP

Sin stock
Price Consultar Precio
MALE CONNECTOR UTP RJ45 C5 C6 WITHOUT TOOLS (ASOMEP)
RJ45 modular plug without tools
TIA/EIA-568-B.2, ISO/IEC11801 and EN50173-1

Cat. RJ45 5/6 tool-free plug with kink protection

Configurable EIA-TIA.568A/B
FOR FLEXIBLE AND RIGID CABLE AWG24 TO 26
UNSCREENED UTP
Easy to wire RJ45 plug for round cables
gold plated CONTACTS
Color Pre-Assorted Contacts, Single Wire
Inner conductor wired according to colors

With this tool-less RJ45 connector from Asomep Network Solutions, there is no need for a crimping/crimping tool. Simply remove about 15mm of the cable, select the T568A or B wiring style, place the cables in the corresponding color coded slot, and snap the connector boot/body onto the cable. When the boot closes [...]

Util Kit Fusionadora FITEL FURUKAWA NINJA. Incluye: Holders fijos S712T-010 , F.A.Cable red, 1 batería, , afilador electrodos, c

Ref. ATSNINJANJ001SC

Sin stock
Price Consultar Precio
FITEL FURUKAWA NINJA NJ001 Fuser KIT


It includes:
Configuration of S712T-010 fixed Holders for 250um and 900um fibers, triple hole fiber stripper, power supply and mains cable, 1 battery, spare electrode pair, electrode sharpener, cleaning brush, carrying case , user manual

The FITELNINJA NJ001 Handheld Single Fiber Fusion Splicer is suitable for all METRO, LAN and FTTx fibers including ultra flex insensitive fibers. With its low profile, compact and rugged body, the NJ001 offers reliable splices in harsh environmental conditions. The large battery capacity allows 100 splicing and heating cycles. Combining portability, power, flexibility and field ruggedness, the NJ001 offers fast and consistent splicing with outstanding mobility and optimal ease of u[...]

Conector Macho RJ45 UTP 8P8C Cat.6e (8 Vías) AWG 26/7 10/100/1000 Flexible Tool Necesaria Mín.100u. Con Guía - Asomep

Ref. CMUC60000GUIA

En stock
Price €1.00
UTP RJ45 CAT6 MALE CONNECTOR USA model WITH GUIDE 25 microns (ASOMEP)
Male Connector RJ45 UTP 8P8C Category 6 (8 ways) AWG 26/7 - 27/7 Flexible Required Tool Minimum 100u. With Guide - Asomep

AWG.24/7-26/7
Special Flexible Conductor

Presentation:
Picking: Bags of 100 Units
Packing: Bags of 1,000 Units
Packaging: Boxes of 10,000 Units

Cat 6 modular male connector with Asomep manufacturer's guide, male RJ45

Easily connect your Ethernet cables with this Cat 6 (Category) Modular Plug from asomep.com. It's a quick and easy termination solution that lets you choose the lengths of your high-speed patch cords to suit your needs. Use this article to establish reliable Internet signal transmissions to devices such as computer[...]

Util Tester KIT Fusionadora FITEL FURUKAWA S179A

Ref. PMKITS179

Sin stock
Price €5,735.48
Util Tester KIT Splicer FITEL FURUKAWA S179A

The new Fitel S179 core-aligned fiber optic splicer is easy and convenient to use. It is ideal for splicing optical fibers into outside plant cables due to its high precision and speed. It is a very fast machine because it makes fusions in 6 seconds and its oven takes only 9 seconds.

Features and Benefits
• Exceptional performance for fast and consistent fiber splices
• Greater ease of use and portability
• High speed heating and splicing1
• Reinforced body design
• Easy and intuitive operation
• Supports Splice-OnConnectors (SOC)
• State-of-the-art communication methods
• Quick and easy maintenance

Applications
Fiber Sensors, Optical Component Manufacturing, FTT[...]

Conector Macho RJ45 UTP 8P8C Cat.6a (8 Vías) AWG23/1 10/100/1000/10000 Rigido y Flexible Vista Frontal, cables1,0MM/6-7MM 3P 50U

Ref. CMUFEHF66AU50

En stock
Price €0.62
RJ45 UTP Male Connector 8P8C Category 6 (8-way) AWG 26/7-27/7 Flexible Tool Required Minimum 100u. With Guide - Stewart

RJ45 Cat 6/6A Quick Connector
RJ45 UTP Male Quick Connector Cat6/6A 1.0mm/6.5mm 3-pin 50u"
Packaging: 1/50/2100 units
Special connector to prevent pinning errors, ideal for high-rise installations
Quick connectors feature a unique integrated Hi-Lo stepped load bar and allow "large" conductors to pass through the front end of the connector, making it easy to verify the wiring sequence before termination. This connector is typically used with Cat6A cabling and is recommended for PoE/PoE+ and data applications. The termination tool for these connectors is the EXO crimp frame and the EXO-EX die (100061C). Compatible with Platinum Tools.

Util Fibras Ópticas Pelador Fibras 3 Fundas 900,250 y 125micras RIPLEY-MILLER

Ref. ATSAFSFOCF

Sin stock
Price Consultar Precio

New fiber stripper with center feed design allows for longitudinal approach fiber stripping
The fiber is fully supported in the stripping process of 900 micron buffer coating to 250 micron and standard 250 micron coating to 125 micron stripping
Side mounted stripper blades provide convenient stripping of 1.6 mm to 3 mm cable jackets
Measurement scale in inches/mm built into the tool jaw and body up to 2 3/4 in. (70 mm) for ease of proper cable preparation
Compact, lightweight and ergonomically designed for ease of use
All cutting surfaces are precision formed, hardened, tempered and ground assuring precise cable jacket, buffer and acrylate removal with no scratching or nicking of the fiber
Tool is factory set and require[...]

Util Fibra Óptica Herramienta de Sangrado para Cable de Fibra öptica. FTTH RIPLEY-Miller

Ref. ATSAFS80930

Sin stock
Price Consultar Precio
Mid-Span Access Tool
Allows easy mid-span access to optical fibers in loose buffer tubes
Access tube sizes from 1.9 mm to 3.0 mm
Shaves precise opening to prevent fiber damage
Sizing channels to easily determine tube size
Locking mechanism ensures tool will remain closed through the entire shaving operation
Replacement Blade: Part No.: 80935 (5 blades ? 2 screws)
Made in the U.S.A.
Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm)
Weight: 1.36 oz (38.5g)
Part No.: 80930